Push pin titanium threadless labret 1.2mm with 4mm base 0.5mm inner diamater. Ti-6AL-4V-ELI Titanium ASTM F136 Post only Threadless
How to Use Threadless Jewellery:
Threadless jewellery is a push pin technology which uses tension between the end and the shaft to fit and stay together. The end has an insertion pin which is slightly bent when inserted into a straight shaft. This slight bend of the pin against the straight shaft creates a spring tension, holding the end securely in place. Follow the instructions below to secure the threadless end into the threadless shaft.
Insert the pin one-third to halfway into the shaft. Hand-bend slightly the insertion pin against the shaft, as shown in the gallery of images.
Push the end into the shaft and test the fit. Adjusting the Fit: If it is too tight, take some of the bend out of the pin and try again. Remember, adjust slightly and then try again.
IMPORTANT : Please check you know your exact size/length/gauge(thickness) before buying as there are no exchanges or returns possible with any of the body jewellery due to hygiene reasons. If you aren’t sure about sizing or have any questions about a product please email email@example.com